To the top of the document
Cruze
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Instrument Panel Tie Bar Replacement — Left Hand Drive

Removal Procedure
  1. Remove instrument panel assembly. Refer to Instrument Panel Assembly Replacement .

    2. 2027818
  2. Remove instrument panel wiring harness (2) from instrument panel tie bar (1).

    3. Disconnect electrical connectors.


    2027821
  3. Remove instrument panel tie bar (2).
    4. 3.1. Remove 4 instrument panel tie bar bolts (3, 4).
    3.2. Remove 2 instrument panel tie bar nuts (1).

Installation Procedure

    Caution: Refer to Fastener Caution in the Preface section.


    2027821
  1. Install instrument panel tie bar (2).
    2. 1.1. Install 4 instrument panel tie bar bolts (3, 4) and tighten to 22 N·m (16 lb ft).
    1.2. Install 2 instrument panel tie bar nuts (1) and tighten to 9 N·m (80 lb in).

    2027818
  2. Install instrument panel wiring harness (2) to instrument panel tie bar (1).

    3. Connect electrical connectors.

  3. Install instrument panel assembly. Refer to Instrument Panel Assembly Replacement .
   


© Copyright Chevrolet. All rights reserved